Construction Trades Program

In United States, 93 schools offer Construction Trades program. The average tuition & fees at the schools is $8,863.

2020 Average Tuition for Construction Trades Programs

Total 93 schools offer the Construction Trades programs. Its average tuition & fees is $8,863. In public schools, the tuition & fees is $4,779 for State residents and $7,992 for out-of-state students. In private schools the costs for the Construction Trades program is $18,118.
2020 Tuition & Fees of Construction Trades programs
Tuition & Fees
In-State (public schools)$4,779
Out-of-State (public schools)$7,992
Private schools$18,118
Average$8,863

What is Construction Trades Program?

Construction Trades is A program that generally prepares individuals to apply technical knowledge and skills in the building, inspecting, and maintaining of structures and related properties. May include instruction in masonry, carpentry, electrical and power transmission installation, building/construction finishing, management, inspection and other construction-related applications.

Sub Programs of Construction Trades

Check out sub programs and/or concentrated Construction Trades programs.

A program that prepares individuals to apply technical knowledge and skills in the laying and/or setting of exterior brick, concrete block, hard tile, marble and related materials, using trowels, levels, hammers, chisels, and other hand tools. Includes instruction in technical mathematics, blueprint reading, structural masonry, decorative masonry, foundations, reinforcement, mortar preparation, cutting and finishing, and applicable codes and standards
request info
A program that prepares individuals to apply technical knowledge and skills to lay out, cut, fabricate, erect, install, and repair wooden structures and fixtures, using hand and power tools. Includes instruction in technical mathematics, framing, construction materials and selection, job estimating, blueprint reading, foundations and roughing-in, finish carpentry techniques, and applicable codes and standards
request info
A program that generally prepares individuals to apply technical knowledge and skills to install indoor and outdoor residential, commercial, and industrial electrical systems, and associated power transmission lines. Includes instruction in electricity, safety procedures, wiring, insulation and grounding, schematic blueprint interpretation, equipment operation and maintenance, and applicable codes and standards
request info
A program that prepares individuals to apply technical knowledge and skills to install, operate, maintain, and repair electric apparatus and systems such as residential, commercial, and industrial electric-power wiring; and DC and AC motors, controls, and electrical distribution panels. Includes instruction in the principles of electronics and electrical systems, wiring, power transmission, safety, industrial and household appliances, job estimation, electrical testing and inspection, and applicable codes and standards
request info
A program that prepares individuals to apply technical knowledge and skills to install, operate, maintain and repair local, long-distance, and rural electric power cables and communication lines; erect and construct pole and tower lines; and install underground lines and cables. Includes instruction in cable installation and repair, fibre-optic technology, trenching, mobile equipment and crane operation, high-voltage installations, maintenance and inspection, safety, remote communications, and applicable codes and standards
request info
Any instructional program in Electrical and Power Transmission Installers which is not categorized in sub area
request info
A program that prepares individuals to apply technical knowledge and skills to keep a building functioning, and to service a variety of structures including commercial and industrial buildings and mobile homes. Includes instruction in the basic maintenance and repair skills required to service building systems, such as air conditioning, heating, plumbing, electrical, major appliances, and other mechanical systems
request info
A program that prepares individuals to apply technical knowledge and skills to install and repair fixtures, sheets, windows, and skylights made of glass, plexiglass, and other transparent materials. Includes instruction in site measurement, job analysis and estimation, material cutting and trimming, window and door installation, site safety, equipment operation and maintenance, specification interpretation, and applicable codes and standards
request info
A program that prepares individuals to apply technical knowledge and skills to finish exterior and interior structural surfaces by applying protective or decorative coating materials, such as paint, lacquer, and wallpaper. Includes instruction in surface preparation; selecting, preparing, and applying paints and other coatings; hanging wallpaper; equipment operation and maintenance; finish selection; safety and clean-up; environmental effects on finishes; adhesion properties; and applicable codes and standards
request info
A program that prepares individuals to apply technical knowledge and skills to residential and commercial building construction and remodeling. Includes instruction in construction equipment and safety; site preparation and layout; construction estimating; blueprint reading; building codes; framing; masonry; heating, ventilation, and air conditioning; electrical and mechanical systems; interior and exterior finishing; and plumbing
request info
Any instructional program in Building/Construction Finishing, Management, and Inspection which is not categorized in sub area
request info
A program that prepares individuals to design, install, and test industrial and commercial piping systems and automatic fire and exposure protection systems. Includes instruction in water systems, steam systems, heating and cooling systems, lubricating systems, piping materials, installation tools operation and maintenance, valve installation and repair, technical mathematics, blueprint interpretation, and applicable codes and standards
request info
A program that prepares individuals to practice as licensed plumbers by applying technical knowledge and skills to lay out, assemble, install, and maintain piping fixtures and systems for steam, natural gas, oil, hot water, heating, cooling, drainage, lubricating, sprinkling, and industrial processing systems in home and business environments. Includes instruction in source determination, water distribution, waster removal, pressure adjustment, basic physics, technical mathematics, blueprint reading, pipe installation, pumps, welding and soldering, plumbing inspection, and applicable codes and standards
request info
A program that prepares individuals to apply technical knowledge and skills to set up, maintain, repair, and operate well drilling equipment; locate, drill, construct, and develop water, gas, and oil wells; and test and monitor wells to ensure adequate flow. Includes applications to home, business, and industrial uses
request info
Any instructional program in Plumbing and Related Water Supply Services which is not categorized in sub area
request info
Any instructional program in Construction Trades which is not categorized in sub area
request info

Construction Trades Career Schools

Arizona Western College

Public, 2-4 years
Yuma, AZ

Tuition: $11,450
Population: 6,487
View School
Request Info

Central Arizona College

Public, 2-4 years
Coolidge, AZ

Tuition: $5,160
Population: 4,076
View School
Request Info

Cochise County Community College District

Public, 2-4 years
Sierra Vista, AZ

Tuition: $6,240
Population: 3,327
View School
Request Info

GateWay Community College

Public, 2-4 years
Phoenix, AZ

Tuition: $7,854
Population: 4,670
View School
Request Info

East Arkansas Community College

Public, 2-4 years
Forrest City, AR

Tuition: $3,120
Population: 934
View School
Request Info

Arkansas Northeastern College

Public, 2-4 years
Blytheville, AR

Tuition: $2,738
Population: 1,358
View School
Request Info

North Arkansas College

Public, 2-4 years
Harrison, AR

Tuition: $3,840
Population: 1,604
View School
Request Info

Arkansas State University Three Rivers

Public, 2-4 years
Malvern, AR

Tuition: $5,882
Population: 1,243
View School
Request Info

Front Range Community College

Public, 2-4 years
Westminster, CO

Tuition: $15,454
Population: 18,703
View School
Request Info

Lamar Community College

Public, 2-4 years
Lamar, CO

Tuition: $4,133
Population: 723
View School
Request Info

Trinidad State Junior College

Public, 2-4 years
Trinidad, CO

Tuition: $8,648
Population: 1,404
View School
Request Info

Honolulu Community College

Public, 2-4 years
Honolulu, HI

Tuition: $8,310
Population: 3,378
View School
Request Info

Southwestern Illinois College

Public, 2-4 years
Belleville, IL

Tuition: $6,390
Population: 6,906
View School
Request Info

John A Logan College

Public, 2-4 years
Carterville, IL

Tuition: $5,960
Population: 3,328
View School
Request Info

Joliet Junior College

Public, 2-4 years
Joliet, IL

Tuition: $12,570
Population: 10,267
View School
Request Info

Kaskaskia College

Public, 2-4 years
Centralia, IL

Tuition: $7,530
Population: 2,785
View School
Request Info

Lake Land College

Public, 2-4 years
Mattoon, IL

Tuition: $8,104
Population: 3,862
View School
Request Info

Lewis and Clark Community College

Public, 2-4 years
Godfrey, IL

Tuition: $9,552
Population: 4,683
View School
Request Info

Parkland College

Public, 2-4 years
Champaign, IL

Tuition: $11,580
Population: 5,758
View School
Request Info

Rock Valley College

Public, 2-4 years
Rockford, IL

Tuition: $8,924
Population: 5,762
View School
Request Info
All data used in our site is from IPEDS (The Integrated Postsecondary Education Data System), U.S. Department of Education, academic year 2019-2020